Mazda RX-8 Manual page 1760

Hide thumbs Also See for RX-8:

Table of Contents

TRUNK KEY CYLINDER REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)

3. Detach the rod.

4. Remove the nuts, then remove the trunk key cylinder.

5. Install in the reverse order of removal.

TRUNK KEY CYLINDER SWITCH INSPECTION

1. Remove the trunk key cylinder switch.

2. Inspect for continuity between the trunk key cylinder switch terminals.

Troubleshooting