FUSE
FUSE SERVICE CAUTIONS
CAUTION:
Determine and correct the cause of the burnt fuse before replacing it with the specified type. If the fuse
•
is replaced before doing this, it may burn again.
MAIN FUSE
MAIN FUSE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the main fuse block cover.
3. Remove in the order indicated in the table.
1 Connector
2 Nut
3 Bolt(See Bolt Removal Note .)
4 Main fuse
4. Install in the reverse order of removal.
Bolt Removal Note
1. Press the tabs in the direction indicated by the arrows, lift the main fuse block, and then remove the bolt.
(w)
RX-8 Body
Page 384