Windshield Wiper And Washer Switch Inspection - Mazda RX-8 Manual

Hide thumbs Also See for RX-8:

Table of Contents

WIPER AND WASHER SWITCH

WINDSHIELD WIPER AND WASHER SWITCH REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the column cover.(See COLUMN COVER REMOVAL/INSTALLATION .)

3. Remove the ignition key illumination.(See IGNITION KEY ILLUMINATION BULB

REMOVAL/INSTALLATION .)

4. Disconnect the windshield wiper and washer switch connector.

5. Remove the screws, then remove the windshield wiper and washer switch.

6. Install in the reverse order of removal.

WINDSHIELD WIPER AND WASHER SWITCH INSPECTION

1. Remove the column cover.(See COLUMN COVER REMOVAL/INSTALLATION .)

2. Remove the ignition key illumination.(See IGNITION KEY ILLUMINATION BULB

REMOVAL/INSTALLATION .)

3. Remove the windshield wiper and washer switch.(See WINDSHIELD WIPER AND WASHER

SWITCH REMOVAL/INSTALLATION .)

4. Verify that the continuity between the windshield wiper and washer switch is as indicated in the table.

If not as indicated in the table, replace the windshield wiper and washer switch.