HOOD
HOOD REMOVAL/INSTALLATION
WARNING:
Removing the hood without proper support can be dangerous. The hood may fall and injure you. Always
•
perform the following procedure with at least another person.
1. Disconnect the negative battery cable.
2. To remove the hood hinge, remove the following parts:
a. Front side marker lights
b. Front bumper
c. Front combination lights
d. Front fender panel
3. Remove in the order indicated in the table.
1 Hood insulator
2 Shroud seal weatherstrip
3 Hood
4 Hood hinge
5 Hood stay
4. Install in the reverse order of removal.
5. Adjust the hood.
(w)
RX-8 Body
Page 2