INSPECT SEAT BELT WARNING LIGHT
Connect the instrument cluster connector.
•
Ground instrument cluster connector terminal 2G
•
3
using a jumper wire.
Turn the ignition switch to the ON position.
•
Does the seat belt warning light illuminate?
•
[Present malfunction
diagnosis]
Replace the SAS control
•
module.
(See SAS CONTROL
Yes
MODULE
REMOVAL/INSTALLATIO
N .)
[Past malfunction diagnosis]
DTC troubleshooting
•
completed.
Replace the instrument cluster.
No
(See INSTRUMENT CLUSTER
REMOVAL/INSTALLATION .)
(w)
RX-8 Safety
Page 36