DTC P0762
DTC P0762
DETECTION
CONDITION
POSSIBLE CAUSE
Shift solenoid B malfunction (stuck on)
Large difference between actual gear ratio and gear ratio set in TCM.
•
Diagnostic support note:
This is continuous monitor (CCM).
•
MIL illuminates if TCM detects the above malfunction conditions in two
•
consecutive drive cycles.
PENDING CODE is available.
•
FREEZE FRAME DATA is available.
•
AT warning light does not illuminate.
•
DTC is stored in TCM memory.
•
Shift solenoid B malfunction
•
Shift valve B stuck
•
TCM malfunction
•
(w)
RX-8 Transmission (Manual & Auto)
Page 216