Vanity Mirror Illumination - Mazda RX-8 Manual

Hide thumbs Also See for RX-8:

Table of Contents

VANITY MIRROR ILLUMINATION

VANITY MIRROR ILLUMINATION BULB REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the lens.(See Lens Removal Note .)

3. Remove the vanity mirror illumination bulb.

4. Install in the reverse order of removal.

Lens Removal Note

1. Insert a tape-wrapped flathead screwdriver into the service hole and pry with the screwdriver in the

direction shown by the arrow to remove the lens.