Sony Handycam DCR-TRV950E Operating Instructions Manual page 280

Changing the default settings with the menu
Icon/item
OTHERS
DISPLAY
REC LAMP
VIDEO EDIT
Note
If you press DISPLAY/TOUCH PANEL with DISPLAY set to V-OUT/LCD in the menu settings, the
picture from a TV or VCR will not appear on the LCD screen even when your camcorder is connected
to outputs on the TV or VCR.
When recording a close subject
When REC LAMP is set to ON, the red camera recording lamp on the front of the camcorder may
reflect on the subject if it is close. In this case, we recommend that you set REC LAMP to OFF.
In more than five minutes after removing the power supply
The FLASH LVL, HiFi SOUND, AUDIO MIX, MIC LEVEL and COMMANDER settings are returned to
their default settings.
Other menu settings are held in memory even after removing the power supply.
280
Mode Meaning
z LCD To show the display on the LCD screen and in the
viewfinder
V-OUT/LCD To show the display on the TV screen, LCD screen
and in the viewfinder
z ON To light up the camera recording lamp at the front of
your camcorder
OFF To turn the camera recording lamp off so that the
person is not aware of the recording
z RETURN To cancel video editing
TAPE To make programme and dub on the tape in the other
VCR (p. 126)
MEMORY To make programme and dub on a "Memory Stick"
(p. 205)
POWER
switch
VCR
CAMERA
MEMORY/
NETWORK
CAMERA
MEMORY/
NETWORK
VCR