Sony Handycam DCR-TRV950E Operating Instructions Manual page 13

Recording a picture
Recording a picture
1
Remove the lens cap.
3
Press OPEN to open
the LCD panel.
The picture appears
on the screen.
When you purchase your camcorder, the clock setting is set to off. If you want to record the date
and time for a picture, set the clock setting before recording (p. 30).
Monitoring the playback picture on the LCD
screen
(p. 53)
1
Set the POWER switch
to VCR while pressing
the small green button.
NOTE
Do not pick up your
camcorder by holding the
viewfinder, the flash, the LCD
panel or the battery pack.
(p. 37) (p. 37)
2
4
Viewfinder
When the LCD panel is closed, use the viewfinder with your eye
against the eyecup.
Adjust the viewfinder lens to your eyesight (p. 42).
POWER
MEMORY/
NETWORK
Set the POWER
switch to CAMERA
while pressing the
small green button.
Press START/STOP.
Your camcorder
starts recording. To
stop recording, press
START/STOP again.
2
Press m to rewind the tape.
REW
3
Press N to start playback.
PLAY
POWER
MEMORY/
NETWORK
POWER
MEMORY/
NETWORK
13