Table 84: Emergency Numbers Parameters; Figure 186: 911 Emergency Sample - Grandstream Networks UCM6100 Series User Manual

The table below gives more description of the configuration Parameters when creating emergency numbers.
Name
Emergency Number
Emergency Level
Disable Hunt on Busy
Custom Prompt
Use Trunks
Members Notified

Table 84: Emergency Numbers Parameters

Configure the name of the emergency call.
For example, "emergency911","emergency211" and etc.
Config the emergency service number. For example,"911","211" and etc.
Select the emergency level of the number. Level "3" means the most
urgent.
If this option is not enabled, when the lines of trunks which the coming
emergency call routes by are completely occupied, the line-grabbing
function will automatically cut off a line from all busy lines so that the
coming emergency call can seize it for dialing out. This option is not
enabled by default.
This option sets a custom prompt to be used as an announcement to the
person receiving an emergency call. The file can be uploaded from the
page "Custom Prompt". Click "Prompt" to add additional record.
Select the trunks for the emergency call. Select one trunk at least, and
select five trunks at most.
Select the members who will be notified when an emergency call occurs.

Figure 186: 911 Emergency Sample

UCM6100 Series User Manual
Version 1.0.18.13
P a g e | 288