Payload; Pbx Settings/Voice Prompt Customization; Record New Custom Prompt; Table 93: Internal Options/Payload - Grandstream Networks UCM6100 Series User Manual

Payload

The UCM6100 payload type for audio codecs and video codes can be configured here.
AAL2-G.726
DTMF
G.721 Compatible
G.726
iLBC
H.264
H.265
H.263P
VP8

PBX Settings/Voice Prompt Customization

Record New Custom Prompt

Settings
In the UCM6100 Web GUI→PBX Settings→Voice Prompt→Custom Prompt page, click on "Record New
Custom Prompt" and follow the steps below to record new IVR prompt.
1. Specify the IVR file name.
2. Select the format (GSM or WAV) for the IVR prompt file to be recorded.

Table 93: Internal Options/Payload

Configure payload type for ADPCM (G.726, 32kbps, AAL2 codeword packing).
The default setting is 112.
Configured payload type for DTMF. The default setting is 101.
Configure to enable/disable G.721 compatible. The default setting is Yes.
Configure the payload type for G.726 if "G.721 Compatible" is disabled. The
default setting is 111.
Configure the payload type for iLBC. The default setting is 97.
Configure the payload type for H.264. The default setting is 99.
Configure the payload type for H.264. The default setting is 114.
Configure the payload type for H.263+. The default setting is 100 103.
Configure the payload type for VP8. The default settings is 108.

Figure 208: Record New Custom Prompt

UCM6100 Series User Manual
Version 1.0.18.13
P a g e | 317