Pbx Settings/Rtp Settings; Rtp Settings; Table 92: Internal Options/Rtp Settings - Grandstream Networks UCM6100 Series User Manual

PBX Settings/RTP Settings

RTP Settings

RTP Start
RTP End
Strict RTP
RTP Checksums
ICE Support
STUN Server
•
Ring Group Extensions: 6400-6499
•
Queue Extensions: 6500-6599
•
Voicemail Group Extensions: 6600-6699
•
IVR Extensions: 7000-7100
•
Dial By Name Extensions: 7101-7199
•
Fax Extensions: 7200-8200

Table 92: Internal Options/RTP Settings

Configure the RTP port starting number. The default setting is 10000.
Configure the RTP port ending address. The default setting is 20000.
Configure to enable or disable strict RTP protection. If enabled, RTP packets
that do not come from the source of the RTP stream will be dropped. The default
setting is "Disable".
Configure to enable or disable RTP Checksums on RTP traffic. The default
setting is "Disable".
Configure whether to support ICE. The default setting is enabled.
ICE is the integrated use of STUN and TURN structure to provide reliable VoIP
or video calls and media transmission, via a SIP request/ response model or
multiple candidate endpoints exchanging IP addresses and ports, such as
private addresses and TURN server address.
Configure STUN server address. STUN protocol is a Client/Server and also a
Request/Response protocol. It's used to check the connectivity between the
two terminals, such as maintaining a NAT binding entries keep-alive agreement.
The default STUN Server is stun.ipvideotalk.com.
Valid format:
[(hostname | IP-address) [':' port]
The default port number is 3478 if not specified.
UCM6100 Series User Manual
Version 1.0.18.13
P a g e | 316