Grandstream Networks UCM6100 Series User Manual page 306

Barge Spy
Wakeup Service
PMS Wakeup Service
Update PMS Room Status
Presence Status
Dynamic Agent Logout
The UCM6100 also allows user to one click enable / disable specific feature code as shown below:
•
Default Code: *56 ("Enable Spy" needs to be checked)
•
This is the feature code to join in on the call to assist both
parties.
•
Default Code: *36
•
Dial this code to access UCM wakeup service, you can add,
update, activate or deactivate wakeup service.
•
Default Code: *35
•
Dial this code to access UCM PMS wakeup service, you can
add, update, activate or deactivate PMS wakeup service.
•
Default Code: *23
•
Use this code with maid code to update PMS room status.
Choose the status to set after hearing the prompt, for example:
for maid 001 dial *23001 and then 1 after hearing the prompt.
•
Dial this code to set the presence status of the extension.
•
Possible options are:
1:"unavailable"
2:"available"
3:"away"
4:"chat
5:"dnd
6:"userdef"
•
Default Code: *85
•
Use this code to logout the dynamic agent from all queues.
UCM6100 Series User Manual
Version 1.0.18.13
P a g e | 305