Grandstream Networks UCM6100 Series User Manual page 60
Ip pbx
Hide thumbs
Also See for UCM6100 Series:
- User manual (370 pages) ,
- Manual manual (24 pages) ,
- Configuration (19 pages)
Table of Contents
Advertisement
Priority Value
is 0.
LAN (when Method is set to "Switch")
IP Method
Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
IP Address
Enter the IP address for static IP settings. The default setting is 192.168.0.160.
Subnet Mask
Enter the subnet mask. The default setting is 255.255.0.0.
Gateway IP
Enter the gateway IP address for static IP settings. The default setting is 0.0.0.0.
DNS Server 1
Enter the DNS server 1 address for static IP settings. The default setting is 0.0.0.0.
DNS Server 2
Enter the DNS server 2 address for static IP settings.
User Name
Enter the user name to connect via PPPoE.
Password
Enter the password to connect via PPPoE.
Layer 2 QoS
Assign the VLAN tag of the layer 2 QoS packets for LAN port.
802.1Q/VLAN Tag
The default value is 0.
Layer 2 QoS 802.1p
Assign the priority value of the layer 2 QoS packets for LAN port.
Priority Value
The default value is 0.
LAN 1 / LAN 2 (when Method is set to "Dual")
If "Dual" is selected as "Method", users will need assign the default interface to be
Default Interface
LAN 1 (mapped to UCM6102 WAN port) or LAN 2 (mapped to UCM6102 LAN port)
then configure network settings for LAN 1/LAN 2. The default interface is LAN 2.
IP Method
Select DHCP, Static IP, or PPPoE. The default setting is DHCP.
IP Address
Enter the IP address for static IP settings. The default setting is 192.168.0.160.
Enter the subnet mask address for static IP settings. The default setting is
Subnet Mask
255.255.0.0.
Enter the gateway IP address for static IP settings when the port is assigned as
Gateway IP
default interface. The default setting is 0.0.0.0.
Enter the DNS server 1 address for static IP settings.
DNS Server 1
The default setting is 0.0.0.0.
DNS Server 2
Enter the DNS server 2 address for static IP settings.
User Name
Enter the user name to connect via PPPoE.
Password
Enter the password to connect via PPPoE.
Layer 2 QoS
Assign the VLAN tag of the layer 2 QoS packets for LAN port.
802.1Q/VLAN Tag
The default value is 0.
Layer 2 QoS 802.1p
Assign the priority value of the layer 2 QoS packets for LAN port.
Priority Value
The default value is 0.
IPv6 Address
WAN (when "Method" is set to "Route")
IP Method
Select Auto or Static. The default setting is Auto
UCM6100 Series User Manual
Version 1.0.18.13
P a g e
|
59
- Quick Links:
- Firmware Version 1.0.18.13
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
