Table 88 : Parking Lot; Figure 200 : New Parking Lot - Grandstream Networks UCM6100 Series User Manual

User can create a new Parking lot by clicking on button "Create New Parking Lot"
Parking Lot Extension
Parking Lot Name
Parked Slots
Use Parklot as Extension
Parking Timeout (s)
Music On Hold Classes
Failover Destination
Ring All Callback on Timeout
Forward to destination on
timeout

Figure 200 : New Parking Lot

Table 88 : Parking Lot

•
Default Extension: 700
•
During an active call, initiate blind transfer and then enter this
code to park the call.
•
Set a name to the parking lot
•
Default Extension: 701-720
•
These are the extensions where the calls will be parked, i.e.,
parking lots that the parked calls can be retrieved.
•
If checked, the parking lot number can be used as extension.
The user can transfer the call to the parking lot number to park
the call. Please note this parking lot number range might conflict
with extension range.
•
Default setting is 300 seconds and the maximum limit is 99.999
seconds.
•
This is the timeout allowed for a call to be parked. After the
timeout, if the call is not picked up, the extension who parks the
call will be called back.
Select the Music on Hold Class.
Configures a callback failover destination when the extension that
is called back is busy. The call will be routed to the destination
number and this reduces the chance of dropping parked calls.
If enabled, all registered endpoints of the extension will ring when
callback occurs. Otherwise, the original endpoint will be called back.
If enabled, the call will be routed to the configured destination upon
timeout. Otherwise, the call will be routed back to the original caller.
UCM6100 Series User Manual
Version 1.0.18.13
:
P a g e | 307