Configure the maximum number of CCSS agents which may be allocated for this
CC Max Agents
channel. In other words, this number serves as the maximum number of CC
requests this channel can make. The minimum value is 1.
Configure the maximum number of monitor structures which may be created for
this device. In other words, this number tells how many callers may request CC
CC Max Monitors
services for a specific device at one time.
The minimum value is 1.
Select the VoIP trunk type.
•
Type
•
Configure a unique label to identify this trunk when listed in outbound rules,
Provider Name
inbound rules etc.
Host Name
Configure the IP address or URL for the VoIP provider's server of the trunk.
If enabled, the trunk CID will not be overridden by extension's CID when the
Keep Trunk CID
extension has CID configured. The default setting is "No".
Enter the username to register to the trunk from the provider when "Register IAX
Username
Trunk" type is selected.
Enter the password to register to the trunk from the provider when "Register IAX
Password
Trunk" type is selected.
Disable This Trunk
If selected, the trunk will be disabled.
Basic Settings
Configure a unique label to identify this trunk when listed in outbound rules,
Provider Name
inbound rules etc.
Host Name
Configure the IP address or URL for the VoIP provider's server of the trunk.
If enabled, the trunk CID will not be overridden by extension's CID when the
Keep Trunk CID
extension has CID configured.
The default setting is "No".
Disable This Trunk
If selected, the trunk will be disabled.
Configure the Caller ID. This is the number that the trunk will try to use when
making outbound calls. For some providers, it might not be possible to set the
CallerID with this option and this option will be ignored.
Caller ID
Important Note: When making outgoing calls, the following priority order rule will
be used to determine which CallerID will be set before sending out the call :
From user (Register Trunk Only) → CID from inbound call (Keep Original CID
Table 56: Create New IAX Trunk
Peer IAX Trunk
Register IAX Trunk
Table 57: IAX Register Trunk Configuration Parameters
UCM6100 Series User Manual
Version 1.0.18.13
P a g e
|
189