Grandstream Networks UCM6100 Series User Manual page 156

Configure Voicemail. There are three valid options and the default option is "Enable
Local Voicemail".
Voicemail
Enable WebRTC
Enable WebRTC support.
Support
Configure the SIP/IAX password for the users. Three options are available to create
password for the batch of extensions.
•
SIP/IAX Password
•
•
Configure Voicemail password (digits only) for the users.
•
Voicemail
Password
•
•
Configure CallerID Number when adding Batch Extensions.
•
CallerID Number
•
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM6100, which can be configured in
the
Prompt→Custom Prompt: General Preference. The valid range is between 5
Ring Timeout
seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring timeout used is the
shortest time set by either device.
Enable automatic recording for the calls using this extension. The default setting is
Auto Record disabled. The recording files can be accessed under Web GUI→CDR→Recording
Files.
•
Disable Voicemail: Disable Voicemail.
•
Enable Local Voicemail: Enable voicemail for the user.
•
Enable Remote Voicemail: Forward the notify message from remote
voicemail system for the user, and the local voicemail will be disabled. Note:
Remote voicemail feature is used only for Infomatec (Brazil).
User Random Password.
A random secure password will be automatically generated. It is recommended
to use this password for security purpose.
Use Extension as Password.
Enter a password to be used on all the extensions in the batch.
User Random Password.
A random password in digits will be automatically generated. It is recommended
to use this password for security purpose.
Use Extension as Password.
Enter a password to be used on all the extensions in the batch.
Use Extension as Number
Users can choose to use the extension number as CallerID
Use as Number
Users can choose to set a specific number instead of using the extension number.
global ring timeout setting
UCM6100 Series User Manual
Version 1.0.18.13
under Web GUI→PBX Settings→Voice
P a g e | 155