The WakeUp service can be used to schedule a reminder or wake up calls to any valid destination. This service
is available on the UCM6100 as a separated module.
There are three ways to set up Wakeup Service:
•
Using admin login
•
Using user portal
•
Using feature code
WakeUp Service using Admin Login
1. Login to the UCM as admin.
2. WakeUp service can be found under Web GUI→Value-added Features→Wakeup Service, click
on
3. Fill out the required fields and select the members to add to the wakeup group.
WAKEUP SERVICE
to create a new wakeup service. The following window will pop up.
Figure 242: Create New Wakeup Service
UCM6100 Series User Manual
Version 1.0.18.13
P a g e
|
357