Inbound Rule Configurations; Table 62: Inbound Rule Configuration Parameters - Grandstream Networks UCM6100 Series User Manual

Ip pbx
Hide thumbs Also See for UCM6100 Series:
Table of Contents

Advertisement

Inbound Rule Configurations

Trunks
Pattern
Disable This Route
Prepend Trunk Name
Prepend User Defined
Name
Alert-Info
Allowed to Seamless
Transfer

Table 62: Inbound Rule Configuration Parameters

Select the trunk to configure the inbound rule.
All patterns are prefixed with the "_".
Special characters:
X: Any Digit from 0-9.
Z: Any Digit from 1-9.
N: Any Digit from 2-9.
".": Wildcard. Match one or more characters.
"!": Wildcard. Match zero or more characters immediately.
Example: [12345-9] - Any digit from 1 to 9.
The pattern can be composed of two parts, Pattern and CallerID Pattern. The
first part is used to specify the dialed number while the second part is used to
specify the caller ID and it is optional, if set it means only the extension with
the specific caller ID can call in or call out.
'_2XXX/1234' means the only extension with the caller ID '1234' can use this
rule.
Notes:
Multiple patterns can be used. Each pattern should be entered in new line.
Users can add comments to a dial plan by typing "/*" and "*/" before and after
each comment respectively.
Example:
Pattern
_X.
_NNXXNXXXXX /* 10-digit long distance */
_818X. /* Any number with leading 818 */
After creating the inbound route, users can choose to enable and disable it. If the
route is disabled, it will not take effect anymore. However, the route settings will
remain in UCM. Users can enable it again when it's needed.
Prepend trunk name to display.
Prepend a user defined name to display name.
Configure the Alert-Info, when UCM6100 receives an INVITE request, the Alert-Info
header field specifies an alternative ring tone to the UAS.
Allows the selected extension to use this function. If an extension is busy, and a
mobile phone is bound to that extension, the mobile phone can pick up calls to that
extension.
UCM6100 Series User Manual
Version 1.0.18.13
For example, pattern
CallerID Pattern
1000
1001
P a g e
|
207

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ucm6102Ucm6104Ucm6108Ucm6116

Table of Contents