PIN Groups
The UCM6100 supports pin group. Once this feature is configured, users can apply pin group to specific
outbound routes. When placing a call on pin protected outbound routes, caller will be asked to input the group
pin number, this feature can be found on the webGUI→Extension/Trunk→Outbound Routes→PIN Groups.
Name
Record In CDR
PIN Number
PIN Name
Once user click on
Figure 108: Blacklist Import/Export
Table 61: Outbound Routes/PIN Group
Specify the name of the group
Specify whether to enable/disable record in CDR
Specify the code that will asked once dialing via a trunk
Specify the name of the PIN
the following figure shows to configure the new PIN.
UCM6100 Series User Manual
Version 1.0.18.13
P a g e
|
202