Batch Add Extensions; Batch Add Sip Extensions; Table 45: Fxs Extension Configuration Parameters→Specific Time; Table 46: Batch Add Sip Extension Parameters - Grandstream Networks UCM6100 Series User Manual

•
•
Skip Trunk Auth
•
Time Condition for If "Skip Trunk Auth" is set to "By Time", select a time condition during which users can
Skip Trunk Auth skip entering password when making outbound calls.
Dial Trunk
Configure personal password when making outbound calls via trunk.
Password
If enabled, this extension will be added to LDAP Phonebook PBX list; if disabled, this
Enable LDAP
extension will be skipped when creating LDAP Phonebook.
Select which Music On Hold class to suggest to extension when putting the active call
Music On Hold
on hold.
Call Duration Limit Configure the maximum duration of call-blocking.
Specific Time
Time Condition Click to add Time Condition to configure specific time for this extension.

Batch Add Extensions

Batch Add SIP Extensions

To add multiple SIP extensions, BATCH add can be used to create standardized SIP extension accounts.
However, unique extension user name can't be set using BATCH add.
Under Web GUI→Extension/Trunk→Extensions, click on "Add" and select extension type as SIP extension,
and "add method" as Batch.
General
Start Extension Configure the starting extension number of the batch of extensions to be added.
Create Number Specify the number of extensions to be added. The default setting is 5.
Extension Specify the interval between extensions as preferred when creating a batch of
Incrementation extension.
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
Permission setting is "Internal".
Note: Users need to have the same level as or higher level than an outbound rule's
privilege to make outbound calls from this rule.
If set to "Yes", users can skip entering the password when making outbound calls.
If set to "By Time", users can skip entering the password when making outbound
calls during the selected time condition.
If set to "No", users will be asked to enter the password when making outbound
calls.
Table 45: FXS Extension Configuration Parameters→Specific Time

Table 46: Batch Add SIP Extension Parameters

UCM6100 Series User Manual
Version 1.0.18.13
P a g e | 154