Grandstream Networks UCM6100 Series User Manual page 145

Time Condition for
Ring the external number simultaneously along with the extension on the basis of this
Ring
time condition.
Simultaneously
Use callee DOD on
Use the DOD number when calls are being diverted/forwarded to external
FWD or Ring
destinations or when ring simultaneous is configured.
Simultaneously
Monitor privilege control
Add members from "Available Extensions" to "Selected Extensions" so that the
Allowed to
call-barging
selected extensions can spy on the used extension using feature code.
Seamless transfer privilege control
Any extensions on the UCM can perform seamless transfer. When using Pickup Incall
Allowed to
feature, only extensions available on the "Selected Extensions" list can perform
seamless transfer
seamless transfer to the edited extension.
Other Settings
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM6100, which can be configured in
the
Ring Timeout
Prompt→Custom Prompt: General Preference. The valid range is between 5 seconds
and 600 seconds.
Note: If the end point also has a ring timeout configured, the actual ring timeout used
is the shortest time set by either device.
Enable automatic recording for the calls using this extension. The default setting is
Auto Record
disabled. The recordings can be accessed under Web GUI→CDR→Recording Files.
•
•
Skip Trunk Auth
•
Time Condition for If 'Skip Trunk Auth' is set to 'By Time', select a time condition during which users can
Skip Trunk Auth skip entering password when making outbound calls.
Dial Trunk
Configure personal password when making outbound calls via trunk.
Password
Support Hot- If enabled, SIP Password will accept only alphabet characters and digits. Auth ID will
Desking Mode be changed to the same as Extension.
Enable LDAP If enabled, the extension will be added to LDAP Phonebook PBX list.
Enable WebRTC
Enable registration and call from WebRTC.
Support
global ring timeout
If set to "yes", users can skip entering the password when making outbound calls.
If set to "By Time", users can skip entering the password when making outbound
calls during the selected time condition.
If set to "No", users will be asked to enter the password when making outbound
calls.
UCM6100 Series User Manual
Version 1.0.18.13
setting under Web GUI→PBX Settings→Voice
P a g e | 144