Inbound Route: Inbound Mode Blf Monitoring; Figure 120: Global Inbound Mode; Figure 121 : Inbound Mode - Default Mode; Figure 122 : Inbound Mode - Mode 1 - Grandstream Networks UCM6100 Series User Manual

Inbound Route: Inbound Mode BLF Monitoring

Users can assign MPKs and VPKs to monitor and toggle the current global inbound mode of the UCM.
To do this, please refer to the following steps:
1. Access the UCM web GUI and navigate to Extension/Trunk->Inbound Routes.
2. Click on the
3. Edit the subscribe number field to the desired BLF value.
4. Configure the BLF value on a phone's MPK/VPK. As an example, a GXP2140 with the BLF configured will
show the Inbound Mode status on its screen once configured. The 777 BLF is lit green, indicating that the
current inbound mode is "Default Mode".
5. Pressing the key will toggle the inbound mode to "Mode 1", and the button's color will change to red.
button and enable Inbound Multiple Mode.

Figure 120: Global Inbound Mode

Figure 121 : Inbound Mode - Default Mode

Figure 122 : Inbound Mode - Mode 1

UCM6100 Series User Manual
Version 1.0.18.13
P a g e | 212