Grandstream Networks UCM6100 Series User Manual page 209

Inbound Multiple
Mode
Dial Trunk
Privilege Level
Allowed DID
Destination
Default Destination
Multiple mode allows user to switch between destinations of the inbound rule by
feature codes. Configure related feature codes as described in [Inbound Route:
Multiple Mode]. If this option is enabled, user can use feature code to switch
between different destinations.
This option shows up only when "By DID" is selected. If enabled, the external users
dialing in to the trunk via this inbound route can dial outbound call using the
UCM6100's trunk.
This option shows up only when "By DID" is selected.
•
Disable: Only the selected Extensions or Extension Groups are allowed to
use this rule, when enabled Filter on Source Caller ID.
•
Internal: The lowest level required. All users are allowed to use this rule,
check this level might be risky for security purpose.
•
Local: User with Local level, National or International level are allowed to
use this rule.
•
National: Users with National or International Level are allowed to use this
rule.
•
International: The highest level required. Only users with international
level are allowed to use this rule.
This option shows up only when "By DID" is selected. This controls the destination
that can be reached by the external caller via the inbound route. The DID
destination are:
•
Extension
•
Conference
•
Call Queue
•
Ring Group
•
Paging/Intercom Groups
•
IVR
•
Voicemail Groups
•
Fax Extension
•
Dial By Name
•
All
Select the default destination for the inbound call.
•
Extension
•
Voicemail
•
Conference Room
•
Queue
UCM6100 Series User Manual
Version 1.0.18.13
P a g e | 208