Grandstream Networks UCM6100 Series User Manual page 258

Destination
Advanced Settings
Virtual Queue
-
Position
-
Announcement
Queue Chairman
-
Enable Agent Login
Leave When Empty
Dial in Empty Queue
Failover Destination
Select failover destination to send callers after pressing 1 upon hearing the
custom prompt.
Refer to Call Center Settings and enhancements section for detailed
information about these features.
Enables agent login/logout feature for static agents (supported only on GXP21XX
phones with fw higher than 1.0.9.18).
Configure whether the callers will be disconnected from the queue or not if the
queue has no agent anymore. The default setting is "Strict".
•
Yes
Callers will be disconnected from the queue if all agents are paused or invalid.
•
No
Never disconnect the callers from the queue when the queue is empty.
•
Strict
Callers will be disconnected from the queue if all agents are paused, invalid
or unavailable.
Configure whether the callers can dial into a call queue if the queue has no agent.
The default setting is "No".
•
Yes
Callers can always dial into a call queue.
•
No
Callers cannot dial into a queue if all agents are paused or invalid.
•
Strict
Callers cannot dial into a queue if the agents are paused, invalid or
unavailable.
Choose the destination where the call will be directed when the queue is empty
or when all the agents are not logged in, here are the destinations that can be
configured:
•
Play Sound.
•
Extension.
•
Voicemail.
•
Queues.
•
Ring Group.
•
Voicemail Group.
•
IVR.
•
External Number.
UCM6100 Series User Manual
Version 1.0.18.13
P a g e | 257