Grandstream Networks UCM6100 Series User Manual page 61

IP Address Enter the IP address for static IP settings.
IP Prefixlen Enter the Prefix length for static settings. Default is 64
DNS Server 1 Enter the DNS server 1 address for static settings.
DNS Server 2 Enter the DNS server 2 address for static settings.
LAN (when Method is set to "Route")
Select Disable, Auto or DHCPv6.
Disable: the DHCPv6 server is disabled.
DHCP Server
Auto: Stateless address auto configuration using NDP protocol.
DHCPv6: Stateful address auto configuration using DHCPv6 protocol.
DHCP Prefix Enter DHCP prefix. (Default is 2001:db8:2:2::)
DHCP Prefixlen Enter the Prefix length for static settings. Default is 64
Enter the DNS server 1 address for static settings.
DNS Server 1
Default is (2001:4860:4860::8888)
Enter the DNS server 2 address for static settings.
DNS Server 2
Default is (2001:4860:4860::8844)
Allow IP Address
Configure starting IP address assigned by the DHCP prefix and DHCP Prefixlen.
From
Configure the ending IP address assigned by the DHCP Prefix and DHCP
Allow IP Address To
Prefixlen.
Default IP Lease
Configure the lease time (in seconds) of the IP address.
Time
LAN (when Method is set to "Switch")
IP Method Select Auto or Static. The default setting is Auto
IP Address Enter the IP address for static IP settings.
IP Prefixlen Enter the Prefix length for static settings. Default is 64
DNS Server 1 Enter the DNS server 1 address for static settings.
DNS Server 2 Enter the DNS server 2 address for static settings.
LAN 1 / LAN 2 (when Method is set to "Dual")
Users will need assign the default interface to be LAN 1 (mapped to UCM6102
Default Interface WAN port) or LAN 2 (mapped to UCM6102 LAN port) and then configure network
settings for LAN 1/LAN 2. The default interface is LAN 2.
UCM6100 Series User Manual
Version 1.0.18.13
P a g e | 60