Blf And Event List; Blf; Event List; Table 86: Event List Settings - Grandstream Networks UCM6100 Series User Manual

BLF

The UCM6100 supports BLF monitoring for extensions, ring group, call queue, conference room and parking lot.
For example, on the user's phone, configure the parking lot number 701 as the BLF monitored number. When
there is a parked call on 701, the LED for this BLF key will light up in red, meaning a call is parked against this
parking lot. Pressing this BLF key can pick up the call from this parking lot.
----------------------------------------------------------------------------------------------------------------------------- ----------------------
Note:
On the Grandstream GXP series phones, the MPK supports "Call Park" mode, which can be used to park the
call by configuring the MPK number as call park feature code (e.g., 700). MPK "Call Park" mode can also be
used to monitor and pickup parked call if the MPK number is configured as parking lot (e.g., 701).
-------------------------------------------------------------------------------------------------------------------------------------------- -------

Event List

Besides BLF, users can also configure the phones to monitor event list. In this way, both local extensions on the
same UCM6100 and remote extensions on the VOIP trunk can be monitored. The event list setting is under Web
GUI→Call Features→Event List.
•
Click on "Create New Event List" to add a new event list.
•
Sort selected extensions manually in the Eventlist
•
Click on to edit the event list configuration.
•
Click on to delete the event list.
URI
Local Extensions
Remote Extensions
Special Extensions

BLF AND EVENT LIST

Table 86: Event List Settings

Configure the name of this event list (for example, office_event_list). Please note
the URI name cannot be the same as the extension name on the UCM6100. The
valid characters are letters, digits, _ and -.
Select the available extensions/Extension Groups listed on the local UCM6100
to be monitored in the event list.
If LDAP sync is enabled between the UCM6100 and the peer UCM6100, the
remote extensions will be listed under "Available Extensions". If not, manually
enter the remote extensions under "Special Extensions" field.
Manually enter the remote extensions in the peer/register trunk to be monitored
in the event list. Valid format: 5000,5001,9000
UCM6100 Series User Manual
Version 1.0.18.13
P a g e | 290