Extensions; Create New User; Table 20: Extension Configuration Parameters - Grandstream Networks UCM6108 User Manual

http://arttel.ru

CREATE NEW USER

To manually create new user, go to Web GUI->PBX->Basic/Call Routes->Extensions. Click on "Create
New User" and a new dialog window will show for users to fill in the extension information. The configuration
parameters are as follows.
General
Extension
CallerID Name
CallerID Number
Permission
SIP/IAX Password
Enable Voicemail
Voicemail Password
Email Address
Call Forward Unconditional
Firmware Version 1.0.2.21
http://arttel.ru/shop/ip-atc/ip-ats-grandstream-ucm6102

EXTENSIONS

Table 20: Extension Configuration Parameters

The extension number associated with the user.
Configure the CallerID Name associated with the user. Number, letter,
or space are allowed.
Configure the CallerID Number that would be applied for outbound calls
from this user.
Note:
The ability to manipulate your outbound Caller ID may be limited by your
VoIP provider.
Assign permission level to the user. The available permissions are
"Internal", "Local", "National" and "International" from the lowest level to
the highest level. The default setting is "Internal".
Note:
Users need to have the same level as or higher level than an outbound
rule's privilege in order to make outbound calls using this rule.
Configure the password for the user. A random secure password will be
automatically generated. It is recommended to use this password for
security purpose.
Enable voicemail for the user. The default setting is "Yes".
Configure voicemail password (digits only) for the user to access the
voicemail box. A random numeric password is automatically generated.
It is recommended to use the random generated password for security
purpose.
Fill in the Email address for the user.
Configure the Call Forward Unconditional target number. If not
configured, the Call Forward Unconditional feature is deactivated. The
UCM6100 Series IP PBX User Manual Page 54 of 159