Xilinx Virtex-6 FPGA User Manual page 134

Chapter 4: Receiver
Table 4-22
.
Table 4-22: FPGA RX Interface Attributes
Attribute
BUFFER_CONFIG_LANE0
BUFFER_CONFIG_LANE1
BUFFER_CONFIG_LANE2
BUFFER_CONFIG_LANE3
134
defines the FPGA RX interface attributes.
Type
16-bit Hex Defaults to 16'h4004.
[15:4]: TX_BUFFER_CONFIG[11:0] read pointer adjustment for TX buffer
in the data converter.
• For auto adjustment mode, TX_BUFFER_CONFIG[11:0] = 12'h400.
• For manual adjustment mode, TX_BUFFER_CONFIG[11:0] settings
depend on TX_FABRIC_WIDTH and if the GTH transceivers within a
Quad are configured as a x4 link (GTHX4LANE = 1'b1):
•
x4 (GTHX4LANE = 1'b1): [TX_FABRIC_WIDTH] = [TX_BUFFER_CONFIG]
"16" or "20" (DRP value 3'b000): 12'h0A4
"32" (DRP value 3'b011): 12'h394
"40" (DRP value 3'b101): 12'h394
"64" (DRP value 3'b010): 12'h250
"80" (DRP value 3'b110): 12'h250
"6466" (DRP value 3'b111): 12'h0A4
•
x1 (GTHX4LANE = 1'b0): [TX_FABRIC_WIDTH] = [TX_BUFFER_CONFIG]
"16" or "20" (DRP value 3'b000): 12'h23C
"32" (DRP value 3'b011): 12'h0E8
"40" (DRP value 3'b101): 12'h0E8
"64" (DRP value 3'b010): 12'h3A8
"80" (DRP value 3'b110): 12'h3A8
"6466" (DRP value 3'b111): 12'h23C
[4:0]: RX_BUFFER_CONFIG[3:0] read pointer adjustment for RX buffer
in the data converter.
• For auto adjustment mode, RX_BUFFER_CONFIG[3:0] = 0100.
• For manual adjustment mode, RX_BUFFER_CONFIG[3:0] settings
depend on RX_FABRIC_WIDTH:
[RX_FABRIC_WIDTH] = [RX_BUFFER_CONFIG]
"16" or "20" (DRP value 3'b000): 4'b0001
"32" (DRP value 3'b011): 4'b0000
"40" (DRP value 3'b101): 4'b0000
"64" (DRP value 3'b010): 4'b0000
"80" (DRP value 3'b110): 4'b0000
"6466" (DRP value 3'b111): 4'b0001
www.xilinx.com
Description
Virtex-6 FPGA GTH Transceivers User Guide
UG371 (v2.0) February 16, 2010