Getting started
1.1
Commissioning the device without display
Introduction
In this section, you will learn how to commission the device step-by-step.
Before you start, please read the following safety information:
● General safety information (Page 19)
● Basic safety information: Installing/mounting (Page 23)
● Basic safety information: Connecting (Page 37)
● Basic safety information: Commissioning (Page 45)
Read the entire device manual in order to achieve the optimum performance of the device.
Procedure
1. Mount the device.
Installation (except level) (Page 27)
Installation (level) (Page 30)
2. Connect the device.
Connecting the device (Page 41)
3. Switch on the power supply.
Switching on the supply voltage (Page 46)
SITRANS P320/P420 with 4 to 20 mA/HART
Compact Operating Instructions, 09/2018, A5E38874562-AB
1
7