Rf Communications Conditions: Basic Settings - Omron V780-Series User Manual

Port Settings
Setting item
Web port
Web Password Setting
Setting
All zeros
Not all zeros (any value)
6-4-2

RF Communications Conditions: Basic Settings

RF Communications Mode
You can select the communications mode to specify the operation of communications with RF Tags
according to your environment or application.
Setting
Once
Auto
Focus
Repeat
UHF RFID System V780-series Reader/Writer User's Manual (EtherNet/IP
Description
The logical port number to use for TCP/IP communications with
the client-side application on the Web browser interface.
No login password is set for the Web browser interface if
the setting is all zeros.
Anything other than all zeros is treated as the password.
The password can be up to 15 ASCII characters.
Description
The Reader/Writer communicates with RF Tags when a command
from the host device is executed.
When the Reader/Writer receives a command from the host
device, it automatically detects RF Tags in the antenna communi-
cations range and communicates with them.
The Reader/Writer constantly monitors for RF Tags, focuses on one
RF Tag in the antenna communications range, and diagnoses commu-
nications. When the Reader/Writer receives a command from the host
device, it determines which RF Tag is in front of the Reader/Writer and
communicates with it. Use Focus Mode to help prevent failure to read
target RF Tags or reading unnecessary RF Tags.
After the Reader/Writer receives a command, it repeatedly com-
municates with the RF Tags and returns a response when com-
municating with an RF Tag was possible. Until the smoothing
buffer becomes full, the Reader/Writer does not communicate with
the RF Tag once communicated.
Description
TM
) (Z402)
6 Functions
Default
7090
Default
All zeros
Default
Once
6 - 23
6