Omron V780-Series User Manual page 198

7 Ethernet/IP Communications
SET GEN2 SESSION
Function
This command sets the Gen2 session for the Reader/Writer.
Command Area
Signal/data
CmdCode/Command Code
CmdParam1/Command Parameter 1
CmdParam2/Command Parameter 2
Reserved/Reserved Area
Cnt Response/Update Counter
Response
CmdData/Command Data
Gen2 session
Response Area
Signal/data
ErrCode/Command Code
RespInfo1/Response Information 1
RespInfo2/Response Information 2
RespInfo3/Response Information 3
Cnt/Update Counter
7 - 46
Data type Size
WORD 2 bytes
WORD 2 bytes
WORD 2 bytes
WORD 2 bytes
WORD 2 bytes
WORD 2 bytes
Data type Size
WORD 2 bytes
WORD 2 bytes
WORD 2 bytes
WORD 2 bytes
WORD 2 bytes
UHF RFID System V780-series Reader/Writer User's Manual (EtherNet/IP
Function
3007 hex
0000 hex (Not used.)
0000 hex (Not used.)
0000 hex (Not used.)
0000 hex (At command execution)
The value is counted up due to a change in
the update counter.
For details, refer to Update Counter/Update
Counter Response on page 7-10.
Specifies the session to use for RF Tag com-
munications.
0000 hex: S0 flag
0001 hex: S1 flag
0002 hex: S2 flag
0003 hex: S3 flag
Default setting: 0000 hex
Function
Error code
0000 hex (Not used.)
0000 hex (Not used.)
0000 hex (Not used.)
0000 to FFFF hex
The value is counted up due to a change in
the response area.
For details, refer to Update Counter/Update
Counter Response on page 7-10.
TM
) (Z402)