Omron V780-Series User Manual page 192

7 Ethernet/IP Communications
SET TRANSMISSION POWER
Function
This command sets the transmission powers of the Reader/Writer.
Command Area
Signal/data
CmdCode/Command Code
CmdParam1/Command Parameter 1
CmdParam2/Command Parameter 2
Reserved/Reserved Area
Cnt Response/Update Counter
Response
CmdData/Command Data
Master
Reader/Writer
Slave
Reader/Writer
1
...
Slave
Reader/Writer
7
7 - 40
Data type
WORD
WORD
WORD
WORD
WORD
Transmis- WORD
sion power
(Read)
Transmis- WORD
sion power
(Write)
Transmis- WORD
sion power
(Read)
Transmis- WORD
sion power
(Write)
... ...
Transmis- WORD
sion power
(Read)
Transmis- WORD
sion power
(Write)
UHF RFID System V780-series Reader/Writer User's Manual (EtherNet/IP
Size
2 bytes 3003 hex
2 bytes Number of words in transmission power set-
tings
0002 to 0010 hex
* Number of Readers/Writers x 2 words
2 bytes 0000 hex (Not used.)
2 bytes 0000 hex (Not used.)
2 bytes 0000 hex (At command execution)
The value is counted up due to a change in
the update counter.
For details, refer to Update Counter/Update
Counter Response on page 7-10.
2 bytes Specifies the transmission power for read RF
communications commands.
000F to 001B hex (15 to 27 dBm)
Default setting: 001B hex
2 bytes Specifies the transmission power for write RF
communications commands.
000F to 001B hex (15 to 27 dBm)
Default setting: 001B hex
2 bytes Specifies the transmission power for read RF
communications commands.
000F to 001B hex (15 to 27 dBm)
Default setting: 001B hex
2 bytes Specifies the transmission power for write RF
communications commands.
000F to 001B hex (15 to 27 dBm)
Default setting: 001B hex
...
2 bytes Specifies the transmission power for read RF
communications commands.
000F to 001B hex (15 to 27 dBm)
Default setting: 001B hex
2 bytes Specifies the transmission power for write RF
communications commands.
000F to 001B hex (15 to 27 dBm)
Default setting: 001B hex
Function
TM
) (Z402)