Omron V780-Series User Manual page 151

Channel monitor for Multiple Reader/Writers
You can use the Utilities View (click the Utilities Button and then click the Channel monitor Tab) on
the Web browser interface, to check the channel settings separately for the master or slave
Reader/Writer.
You can specify the target Reader/Writer number to monitor on the Channel monitor Tab Page.
Command error log
If, with the Multi-Reader/Writer function enabled, the master Reader/Writer responds with a communi-
cations command error, the reader/writer number of the reader/writer where the error was detected is
added and registered to the command error log. (For details, see the "Command Error Log" chapter)
Communications Diagnostics/RF Communications Diagnostics Log
With the Multi-Reader/Writer functions enabled, the Communications Diagnostics functions cannot be
used as well.
Even if the communications diagnostic settings are enabled, diagnostic processing cannot be executed
when executing communications commands.
UHF RFID System V780-series Reader/Writer User's Manual (EtherNet/IP
Specify the target Reader/Writer
number to be monitored.
TM
) (Z402)
6 Functions
6
6 - 79