Setting And Getting Reader/Writer Information Settings - Omron V780-Series User Manual

7 Ethernet/IP Communications
7-2-4

Setting and Getting Reader/Writer Information Settings

SET TCP/IP COMMUNICATIONS CONDITIONS
Function
This command sets the TCP/IP communications conditions of the Reader/Writer.
Command Area
Signal/data
CmdCode/Command Code
CmdParam1/Command Parameter 1
CmdParam2/Command Parameter 2
Reserved/Reserved Area
Cnt Response/Update Counter
Response
CmdData/Command Data
IP address setting method WORD
IP address
Subnet mask
Gateway address
*1. Specify 00000000 hex for any IP address setting method other than using a fixed IP address.
Response Area
Signal/data
ErrCode/Command Code
RespInfo1/Response Information 1
RespInfo2/Response Information 2
RespInfo3/Response Information 3
Cnt/Update Counter
7 - 30
Data type
WORD
WORD
WORD
WORD
WORD
DWORD
*1
DWORD
*1
*1 DWORD
Data type
WORD
WORD
WORD
WORD
WORD
UHF RFID System V780-series Reader/Writer User's Manual (EtherNet/IP
Size
2 bytes 2001 hex
2 bytes 0000 hex (Not used.)
2 bytes 0000 hex (Not used.)
2 bytes 0000 hex (Not used.)
2 bytes 0000 hex (At command execution)
The value is counted up due to a change in
the update counter.
For details, refer to Update Counter/Update
Counter Response on page 7-10.
2 bytes IP address setting method to be set
0000 hex: Fixed setting
0001 hex: Obtain from BOOTP server
0002 hex: Obtain from BOOTP server as
fixed settings
Default setting: 0000 hex
8 bytes Fixed IP address to be set
00000000 to DFFFFFFF hex
Default setting: C0A801C8 hex
8 bytes Subnet mask to be set
FF000000 hex to FFFFFFFF hex
Default setting: FFFFFF00 hex
8 bytes Gateway address to be set
00000000 to DFFFFFFF hex
Default setting: CAA801FE hex
Size
2 bytes Error code
2 bytes 0000 hex (Not used.)
2 bytes 0000 hex (Not used.)
2 bytes 0000 hex (Not used.)
2 bytes 0000 to FFFF hex
The value is counted up due to a change in
the response area.
For details, refer to Update Counter/Update
Counter Response on page 7-10.
Function
Function
TM
) (Z402)