Utilities; Rf Tag Access - Omron V780-Series User Manual

6 Functions
6-9

Utilities

6-9-1

RF Tag Access

Outline
You can check communications between the Reader/Writer and host device for RF Tag communica-
tions commands.
You can specify the UII (EPC code) or any address in the RF Tag to access the data.
RF Tag Access Method
The RF Tag Access View displays the communications commands sent to the Reader/Writer and
the response that is received.
To start a test, select a communications command from the RF communication command Box and
enter the parameters required for the command.
After the communications command is sent, the response from the RF Tag is displayed. If communi-
cations diagnostics are enabled, the diagnostic results are also displayed.
The time required to communicate with the RF Tag is also displayed.
Precautions for Correct Use
• You can select any of the following communications commands on the Web browser inter-
face.
Communications
command
ID READ
ID WRITE
DATA READ
DATA WRITE
• You can also manually enter any command and send it.
6 - 46
Data address field
Not used. Not used.
(Grayed out.) (Grayed out.)
Not used. Not used.
(Grayed out.) (Grayed out.)
Used. Used.
(Can be entered.) (Can be entered.)
Used. Not used.
(Can be entered.) (Grayed out.)
UHF RFID System V780-series Reader/Writer User's Manual (EtherNet/IP
Data size field Write data field
Not used.
(Grayed out.)
Used.
(Can be entered.)
Not used.
(Grayed out.)
Used.
(Can be entered.)
TM
) (Z402)