Omron V780-Series User Manual page 209

SET SMOOTHING BUFFER
Function
This command sets the smoothing buffer size of the Reader/Writer.
Command Area
Signal/name
CmdCode/Command Code
CmdParam1/Command Parameter 1
CmdParam2/Command Parameter 2
Reserved/Reserved Area
Cnt Response/Update Counter
Response
CmdData/Command Data
Smoothing Buffer Size
Response Area
Signal/data
ErrCode/Command Code
RespInfo1/Response Information 1
RespInfo2/Response Information 2
RespInfo3/Response Information 3
Cnt/Update Counter
UHF RFID System V780-series Reader/Writer User's Manual (EtherNet/IP
Data type Size
WORD 2 bytes 3011 hex
WORD 2 bytes 0000 hex (Not used.)
WORD 2 bytes 0000 hex (Not used.)
WORD 2 bytes 0000 hex (Not used.)
WORD 2 bytes 0000 hex (At command execution)
The value is counted up due to a change in
the update counter.
For details, refer to Update Counter/Update
Counter Response on page 7-10.
WORD 2 bytes Specifies the smoothing buffer size.
0000 to 0400 hex (0 to 1024 [conditions])
* 0 implies that smoothing is disabled
Default setting: 0400 hex
Data type Size
WORD 2 bytes Error code
WORD 2 bytes 0000 hex (Not used.)
WORD 2 bytes 0000 hex (Not used.)
WORD 2 bytes 0000 hex (Not used.)
WORD 2 bytes 0000 to FFFF hex
The value is counted up due to a change in
the response area.
For details, refer to Update Counter/Update
Counter Response on page 7-10.
TM
) (Z402)
7 Ethernet/IP Communications
Function
Function
7
7 - 57