Errors And Countermeasures; Command Errors - Omron V780-Series User Manual

9 Troubleshooting
9-3

Errors and Countermeasures

This section gives the errors detected by the Reader/Writer and corresponding countermeasures.
The items used in the following tables are described below.
The name of the error.
Error name
Description A description of the error.
Detection timing When the error is detected.
Log category The type of log the error is recorded in.
Additional infor- A description of the additional infor-
mation 1 mation 1 that is recorded.
Probable cause A description of the probable cause of the error.
Workaround A description of countermeasures for the probable cause of the error.
Precautions/ Precautions, restrictions, and other supplemental information.
Remarks
9-3-1

Command Errors

Error name Unknown command error
Description A command that is not supported was received.
Detection timing At command reception
Log category Command error log
Additional infor- None
mation 1
Probable cause A command that is not supported by the Reader/Writer was received.
Workaround Check the command contents and send the command again.
Precautions/ None
Remarks
Error name Command parameter error
Description There was an error in the parameters of the received command.
Detection timing At command reception
Log category Command error log
Additional infor- None
mation 1
Probable cause A parameter exceeding the setting range supported by the command is set.
Workaround Check the command contents and send the command again.
Precautions/ None
Remarks
9 - 8
Error code
Recovery method
Additional infor-
mation 2
Error code
Recovery method
Additional infor-
mation 2
Error code
Recovery method
Additional infor-
mation 2
UHF RFID System V780-series Reader/Writer User's Manual (EtherNet/IP
The value of the error code (four
hexadecimal digits).
How to recover from the error.
A description of the additional infor-
mation 2 that is recorded.
1003 hex
None
None
1005 hex
None
None
TM
) (Z402)