Reader/Writer Settings; Network Settings - Omron V780-Series User Manual

6 Functions
6-4

Reader/Writer Settings

You can use a setting command or a Web browser to set the operating conditions of the Reader/Writer
according to the application environment. These settings are stored in non-volatile memory inside the
Reader/Writer, so they are retained when the power supply to the Reader/Writer is turned OFF.
Setting classifica-
tion

Network settings

RF communica-
tions conditions:
Basic Settings
RF communica-
tions conditions:
Advanced settings
Device settings
6-4-1

Network Settings

TCP/IP Settings
You can set a fixed IP address for the Reader/Writer or you can specify obtaining an IP address from a
BOOTP server.
Precautions for Correct Use
If you change the IP address setting method from Fixed setting to Obtain from BOOTP server or Fix
at the IP address which is obtained from BOOTP server, the IP address, subnet mask, and default
gateway that are set for Fixed setting become 0. If necessary, perform a backup in advance.
Setting item
IP address setting
method
IP address
Subnet mask
Default gateway
address
Device name
*1. If you specify Obtain from BOOTP server for the IP address setting method, the Reader/Writer will ask the
BOOTP server for an IP address setting every time it is started.
*2. If you specify Fix at the IP address which is obtained from BOOTP server for the IP address setting method,
the Reader/Writer will ask the BOOTP server for an IP address setting only the first time that it is started after
the setting was made. Thereafter, it will operate with a fixed IP address setting.
6 - 22
Description
You can set parameters related to the Ethernet
interface on the Reader/Writer.
You can set basic parameters for the operation of
Reader/Writer communications with RF Tags.
You can set advanced parameters for the opera-
tion of Reader/Writer communications with RF
Tags.
You can set parameters related to the operation of
the Reader/Writer.
Description
• Fixed setting
• Obtain from BOOTP server
• Fix at the IP address which is obtained from BOOTP server
Fixed IP address
The subnet mask is a value (IPV4) that is used to identify the net-
work address and host address within the IP address.
The IP address of the gateway to use to reach networks outside
the one that the Reader/Writer is on.
A name that is used to identify the Reader/Writer on the network.
It consists of up to 63 ASCII characters.
UHF RFID System V780-series Reader/Writer User's Manual (EtherNet/IP
The Reader/Writer must be restarted
to enable changes to these settings.
Any changes to these settings are
enabled immediately.
The Reader/Writer must be restarted
to enable changes to these settings.
*1
Remarks
Default
Fixed setting
*2
192.168.1.200
255.255.255.0
192.168.1.254
(Not set.)
TM
) (Z402)