Pair A Mobile Device With M400 - Polar Electro M400 User Manual

1. Press START in time view to enter pre-training mode.
2. Touch your stride sensor with M400, and wait for it to be found.
3. The device ID Pair Polar RUN xxxxxxxx
4. Pairing completed
or
1. Go to General Settings > Pair and sync > Pair new device
2. M400 starts searching for your stride sensor.
3. Once the stride sensor is found,
4. Press START,
5. Pairing completed
For more information, see

PAIR A MOBILE DEVICE WITH M400

Before pairing a mobile device, create a Polar account if you do not already have one, and download Flow app
from the App Store or Google Play. Make sure you have also downloaded and installed FlowSync software
onto your computer from flow.polar.com/start, and registered your M400 in the Flow web service.
Before trying to pair, make sure your mobile device has Bluetooth turned on, and airplane mode/flight mode is
not turned on.
To pair a mobile device:
1. On your mobile device, open Flow app and sign in with your Polar account.
2. Wait for the Connect product view to appear on your mobile device
played.
3. In M400 time mode, press and hold BACK.
4. Connecting to device
5. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on your
M400.
6. Pairing completed
or
1. In M400, go to Settings > General settings > Pair and sync > Pair mobile device
START
2. Once your device is found, the device ID
is shown when you are done.
Polar RUN xxxxxxxx
Pairing is displayed.
is displayed when you are done.
Polar Stride sensor Bluetooth
is displayed, followed by
is displayed when you are done.
is displayed. Choose Yes.
and press START.
is displayed.
Smart.
Connecting to
Polar mobile xxxxxxxx
19
(Searching for Polar
app.
and press
is displayed on M400.
M400) is dis-