Pair A Mobile Device With V800; Delete A Pairing - Polar Electro V800 Owner's Manual

PAIR A MOBILE DEVICE WITH V800

Before pairing a mobile device, create a Polar account if you do not already have one, and download Flow app
from the App Store or Google Play. Make sure you have also downloaded and installed FlowSync software
onto your computer from
Before trying to pair, make sure your mobile device has Bluetooth turned on, and airplane mode/flight mode is
not turned on.
To pair a mobile device:
1. On your mobile device, open Flow app and sign in with your Polar account.
2. Wait for the Connect product view to appear on your mobile device (Searching for Polar V800) is dis-
played.
3. In V800 time mode, press and hold BACK.
4. Connecting to device
5. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on your
V800.
6. Pairing completed
or
1. On your mobile device, open Flow app and sign in with your Polar account.
2. Wait for the Connect product view to appear on your mobile device (Waiting for V800) is displayed.
3. On V800, go to
press START
4. Press START,
5. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on your
V800.
6. Pairing completed

DELETE A PAIRING

To delete a pairing with a sensor or mobile device:
1. Go to Settings > General settings > Pair and sync > Paired devices
2. Choose the device you want to remove from the list and press START.
3. Delete pairing?
4. Pairing deleted
flow.polar.com/start
is displayed, followed by
is displayed when you are done.
Settings > General settings > Pair and sync > Pair and sync mobile device
Connecting to device
is displayed when you are done.
is displayed, choose
is displayed when you are done.
, and registered your V800 in the Flow web service.
Connecting to
is displayed, followed by
Yes and press START.
25
app.
Connecting to app.
and press START.
and