Trace Commands In The Event Log Display; Storing And Loading Traces - HP 64700 Series User Manual

T race Commands
1
in the Event Log
Display
Event Log
Time Type
11:58:52 TRACE Emulation trace started
11:58:52 TRACE Emulation trace complete
12:00:25 TRACE trace find_sequence CALLER_0 then TWO_THREE then CALLER_3 rest
art CALLER_2 trigger about WRITE_NUMBER only range RESULTS thr
u RESULTS+0ffh
12:00:26 TRACE Emulation trace started
12:00:26 TRACE Emulation trace complete
12:01:27 TRACE trace enable 40ah disable 472h
12:01:28 TRACE Emulation trace started
12:01:28 TRACE Emulation trace complete
12:02:19 TRACE trace
12:02:20 TRACE Emulation trace started
12:02:20 TRACE Emulation trace complete
12:02:40 TRACE trace enable 40ah disable 472h
12:02:48 TRACE Emulation trace started
12:02:49 TRACE Emulation trace complete
STATUS: M68000--Running user program
display event_log
run trace
S toring and
1
Loading Traces
2-28 Getting Started
The event log display shows the previous trace commands. To view
the event log display, enter:
display event_log <RETURN>
Message
step display
You can save a trace to a trace file and reload it at a later time. To
store the current trace, enter the command:
store trace trcfile <RETURN>
The trace is saved in a file named "trcfile.TR" in the current
directory. The extension ".TR" is appended to trace files if it is not
specified in the "store trace" command. Enter another trace
command to overwrite the existing trace:
trace <RETURN>
Emulation trace complete______...R....
modify break end ---ETC--