HP 64700 Series User Manual page 222

9-54 Timing: Commands
or_on This parameter allow you to add an
additional glitch condition label name or
label bit number.
any_transition
on This parameter qualifies the transition
condition by specifying a label name or label
bit number.
or_on This parameter allow you to add an
additional transition condition label name or
label bit number.
before This option qualifies the positioning of a
mark by specifying it will be before certain
condition.
< BIT# > This prompts you to enter the label integer
bit number.
cursor This parameter specifies the position of the
mark to be before or after the trigger.
default This option resets the mark to its default
value.
< DOT> This prompts you to enter the literal "." to
designate a specific bit number for a label.
end This parameter specifies the position of the
mark is to be before the end of trace memory.
entering This option specifies a pattern condition will
be entered.
= This designates the assignment of a specific
pattern entered as a numerical value for
comparison.