Using this Manual
This manual will show you how to use the HP 64700-Series
analyzer with the host computer Softkey Interface.
This manual will:
Briefly introduce the analyzer and its features.
Show you how to use the analyzer in its simplest, power-up
condition. From there, it will progressively show you how
and why you would use additional trace commands.
Show you how to use the trace display options.
Show you how to connect the external analyzer probe to
target system signals and how to configure and use the
external analyzer.
Show you how to set up the analyzer trigger to break the
emulator into the monitor program.
Show you how to drive external Coordinated
Measurement Bus (CMB) or BNC trigger signals with the
analyzer trigger.
Show you how to use the Timing Analyzer Softkey
Interface.
This manual will not:
Show you how to use every Softkey Interface command
and option; the Softkey Interface is described in the
Softkey Interface Reference.
Show you how to use coordinate measurements between
multiple emulators; specifics on background,
specifications and use are described in the "Coordinated