Table of Contents
Advertisement
Default Values
A repetitive execution will continue until halted by command or
post processing conditions are specified.
Parameters
modify
when_marks_x_o
greater_than
less_than
< MARKS>
when_runs_equal
< RUNS>
when_sequence_x_o This option specifies a sequence of marks, or
This option returns the current
halt_repetitive_execution command to the
command line for editing.
This option specifies a count of the marks
(a,b,c,d) between the mark_x and mark_o as
the condition to halt a repetitive execution.
The count can be more or less than a
specified amount.
This parameter specifies that the count must
be more than the selected value.
This parameter specifies that the count must
be less than the selected value.
This prompts you to enter the count of
marks.
This option specifies the halt condition to be
a prescribed number of measurements. This
is useful when gathering statistical
information.
This prompts you to enter the integer
number of runs.
an absence of marks, between mark_x and
mark_o as the condition to halt a repetitive
execution.
Timing: Commands 9-41
Advertisement
Table of Contents
