Table of Contents
Advertisement
To display the name of the emulation module
• Using the command line, enter the name_of_module command.
While operating your emulator, you can verify the name of the emulation module.
This is also the logical name of the emulator in the emulator device file.
Examples
To display the name of your emulation module:
name_of_module <RETURN>
The name of the emulation module is displayed on the status line.
To display the event log
• Choose Display→Event Log.
• Position the mouse pointer on the status line, press and hold the select mouse
button, and then choose Display Event Log from the pop-up menu.
• Using the command line, enter the display event_log command.
The last 100 events that have occurred during the emulation session are displayed.
The status of the emulator and analyzer are recorded in the event log, as well as the
conditions that cause the status to change (for example, software breakpoints and
trace commands).
Chapter 6: Using the Emulator
Using System Commands
157
Advertisement
Table of Contents
