Table of Contents
Advertisement
Timing Messages
O verview
1
S tatus Messages
1
Three types of messages appear in the analyzer message line: status
messages, informational messages, and error messages. The
message text along with an explanation and possible responses are
detailed later.
A measurement status message also appears on the right hand side
of the status line. This message will be "External trace complete". It
will be one of the "trace" status messages if in an execution phase.
STATUS: xxxxxxx--Running in monitor
This message indicates the type of emulator/analyzer monitor used.
The "xxxxxxx" may be M68000, Z 80, or other any other emulator
type that is running with an analyzer installed.
STATUS: Connecting to xxxxxx
This start up message indicates the timing analysis software is
beginning the process of communicating with the external analyzer.
The "xxxxxxx" is the emulator name entered at the command line.
STATUS: Initializing user interface
This start up message indicates the timing analysis software is
beginning the diagram initialization process. If a graphics interface
is not found, the message "ERROR: Timing graphics initialization
failed" is displayed, and an ASCII diagram format is used.
C
Timing Messages C-1
Advertisement
Table of Contents
