Examples; The Spmt Demo Program - HP 64700 Series User Manual

E xamples
1
The SPMT Demo
Program
Number of intervals.
N
Mean of the means (i.e., mean of the average
P
m
times in each time range).
This section:
Describes the SPMT demo program.
Performs an example activity measurement on the demo
program and describes the results.
Performs an example duration measurement on the demo
program and describes the results.
The SPMT demo program is a C program that has been supplied
with your Softkey Interface. This program is used in examples in
this chapter to illustrate the SPMT. A diagram of the function
calls in the demo program is shown in figure 4-2.
Refer to your compiler documentation for information on
compiling the demo program and to your Emulator Softkey
Interface User's Guide for information on configuring the emulator
and loading and executing programs.
Generally, you perform the following steps before using the SPMT
to make software performance measurements.
Compile the demo program.
Enter the emulation system and configure the emulator
(map memory, restrict to real-time).
Load and run the demo program.
Performance Measurements 4-17