Table of Contents
Advertisement
Timing: Getting Started
O verview
1
P rerequisites for
1
Using the Timing
Analyzer Softkey
Interface
This chapter describes:
Prerequites for using the Timing Analyzer Softkey
Interface.
Entering the Timing Analyzer Softkey Interface.
Making a simple measurement.
Entering numerical values.
Before you can use the external timing analyzer, you must have
already completed the following tasks:
Verified that the emulator contains an external analyzer.
Installed the Timing Analyzer Softkey Interface software.
Assembled the analyzer probe and connected the analyzer
probe grabbers to points which have signals of interest
(refer to "Using the External Analyzer" earlier in this
manual).
Timing: Getting Started 7-1
7
Advertisement
Table of Contents
