Table of Contents
Advertisement
Note
Customizing the
ASCII Diagram
<----large---><medium-><small>
low ,high,glch, l, h, g,l,h,g,
TIMING_ASCII="abcd,abcd,abcd,ef,ef,ef,g,g,g:..."
These four types of input are loosely delimited by the colon
character ":".
The first three colon ":" characters in the example above are ASCII
characters used to represent the glitch capture mode in large,
medium and small waveforms, respectively.
Waveform Sizes and ASCII Characters
The first part of the shell variable determines the ASCII diagram
characters which are to define the three waveforms sizes.
Where "abcd" represent the four characters to be displayed for a
low, high, and glitch level in the large waveform. As examples, the
default diagram is:
For a low
"abcd" = " _ ".
For a high
"abcd" = " * ".
For a glitch
"abcd" = " : ".
Where "ef" represent the two characters to be displayed for a low,
high, and glitch level in the medium waveform. As examples, the
default diagram is:
For a low
"ef" = " _".
For a high
"ef" = " *".
For a glitch
"ef" = " :".
Timing Diagrams and Outputs B-9
Advertisement
Table of Contents
